DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Mesh Wifi with Ethernet Backhaul unstable
- piste basher
- Offline
- Big Contributor
Less
More
- Posts: 1193
- Thank you received: 7
10 Sep 2020 16:44 #97145
by piste basher
Replied by piste basher on topic Re: Mesh Wifi with Ethernet Backhaul unstable
I hadn't realised there could be a VLAN limitation - the AP903 specifically has a "Enable Bridge VLAN to Mesh" tickbox. When you ask if that is using mesh functionality, what would one look for? The "mesh" status pages say that the mesh is up and running, and if I disconnect one AP my devices move to another one. As I understand it that should happen almost instantly? I'll have to check...
EDIT - no, devices appear to be left "in limbo" if they are connected to a mesh node and the node goes down. Certainly no "instant" changeover
EDIT - no, devices appear to be left "in limbo" if they are connected to a mesh node and the node goes down. Certainly no "instant" changeover
Please Log in or Create an account to join the conversation.
- zarniwoop
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
10 Sep 2020 16:50 #97146
by zarniwoop
Replied by zarniwoop on topic Re: Mesh Wifi with Ethernet Backhaul unstable
Yup, sounds like you are using Mesh. I’ve setup my system putting each access point into AP mode and using the AP central management (where the multiple VLAN functionality has also been removed in the latest firmware on the 2862). I suspect this is probably a case of wait and see for the next firmware version. Right now I cannot even “enable” mesh on the root node (the 2862), it goes to the initialise screen and then does nothing. Changing the admin password back to the default usually fixes this step (or it could be random). Time for some syslog digging later.
Please Log in or Create an account to join the conversation.
- piste basher
- Offline
- Big Contributor
Less
More
- Posts: 1193
- Thank you received: 7
10 Sep 2020 17:13 #97147
by piste basher
Replied by piste basher on topic Re: Mesh Wifi with Ethernet Backhaul unstable
Well you may be right (I hope you are) but some things still puzzle me about this mesh business. How, for example, does it co-exist with the Assisted roaming function, and how does it differ from a bunch of APs in AP mode?
Please Log in or Create an account to join the conversation.
- zarniwoop
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
10 Sep 2020 19:51 #97151
by zarniwoop
Replied by zarniwoop on topic Re: Mesh Wifi with Ethernet Backhaul unstable
One step forward...
[dmn] Error: Password has invalid characters.
You can't have - characters in a password if you are using mesh.
[dmn] Error: Password has invalid characters.
You can't have - characters in a password if you are using mesh.
Please Log in or Create an account to join the conversation.
- NeilH
- Offline
- Member
Less
More
- Posts: 115
- Thank you received: 0
14 Sep 2020 11:19 #97161
by NeilH
Replied by NeilH on topic Re: Mesh Wifi with Ethernet Backhaul unstable
Don't know if it will help but there was new firmware released last Friday for the 912C, version 1.3.5 and there are a few fixes and improvements on the mesh side of it.
Neil..
Neil..
Please Log in or Create an account to join the conversation.
- zarniwoop
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
21 Sep 2020 14:19 #97220
by zarniwoop
Replied by zarniwoop on topic Re: Mesh Wifi with Ethernet Backhaul unstable
As an update. My setup has now been up and stable for 9 days.
My issue was down to having a “-“ character in the password. No objection from the router when I set this password, but “something” in the mesh config cant cope with it and was bombing out. I changed the passwords that I use to omit the “-“ character and everything now works.
My issue was down to having a “-“ character in the password. No objection from the router when I set this password, but “something” in the mesh config cant cope with it and was bombing out. I changed the passwords that I use to omit the “-“ character and everything now works.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek