Downloads and Resources
Vigor 2866 Series
| Firmware Information | |
|---|---|
| Current Version | 4.4.5.2 BT Release Notes |
| Release Date | 13/08/2024 |
| Support Language | English |
| Supported Models |
Vigor 2866 |
IMPORTANT NOTE :
Firmware is normally supplied in two different styles: The ALL file will just upgrade the firmware, whereas the RST file will upgrade the firmware and wipe all settings back to factory defaults.
A note on modem codes
The firmware labelled 'BT' is the recommended mode code for UK lines.
Other modems codes are available, some are newer and others older than the 'BT' 1232305 modem code. The digits indicate the version number, with a higher number being a later revision. Older modem codes can be considered more conservative, and might not include support for supplementary DSL standards or may have parameter options disabled. New modems codes incorporate improvements and support for later standards and may have options enabled.
| Firmware | Modem Code |
|---|---|
| 4.4.5.2_BT | 123230_05 and 123210_14 |
| 4.4.5.2 (Standard) | 123230_02 and 123210_30 |
| 4.4.5.2_MDM1 | 126110_12 and 126010_15 |
| 4.4.5.2_MDM2 | 127210_04 and 127110_01 |
| 4.4.5.2_MDM3 | 127210_04 and 127110_01 |
| 4.4.5.2_MDM4 | 128210_02 and 127210_04 |
| 4.4.5.2_MDM5 | 128210_02 and 127210_04 |
| 4.4.5.2_MDM6 | 129120_05 and 128210_02 |
| 4.4.5.2_MDM7 | 129120_05 and 128210_02 |
The resources on these pages are for users in the UK and Ireland only. If you are outside of the UK/Ireland, please contact your local supplier, the local support resource in your country or use the DrayTek International site instead
