I'm having problems getting the PSTN relay / passthrough to work on my 2820Vn correctly due to timing issues when swtiching over to PSTN and dialing.

The sequence is:

Pick up handset ==> Get dial tone
Dial number ==> number dials
PAUSE
Beep Beep
Dials number again
Then I get the PSTN dial tone

So the system is redialing the number before I have the PSTN line.

Is there a way to fix this or am I missing something.

Thanks for reading this.

what version firmware are u running, the early (release) versions suffered from this.

drewy thanks for the reply
3.3.0 having downloaded v2820_330_211801 and upgrade the firmware

I also have this problem.. and it's referred to here

http://www.forum.draytek.co.uk/viewtopic.php?t=10144&highlight=pstn

it is odd.. because if I use the #0 method to dial out, the PSTN line comes up quickly.

I am on the 3.3.0 firmware..

This concerns me that this causes 999 calls not to work.

Hopefully this does not cause a real problem is not a legal issue waiting to happen.

Telis/414NSW

Are you both still having this issue or did you manage to resolve it?

I cannot fix this problem despite a whole long list of different attempts.

I am hoping it is just the one I have and not the whole lot.