DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Draytek 3300 and QOS settings
- geseekoo
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 12
- Thank you received: 0
01 May 2010 04:54 #61854
by geseekoo
Draytek 3300 and QOS settings was created by geseekoo
Having looked through the forums ,it appears that may people have issues configuring QOS on the 3300 , DOES QOS WORK on the 3300 ? , i have attempted to prioritize voip traffic from the phone server for in and out , and it does not work , i also dont think QOS workks OVER VPNs , the instructions in the manual are not very helpful , no one seems to answer and ones questions re same , is it possible someone from Draytek can post info on how to setup QOS correctly and how to monitor it , i cant see anywhere to see if qos is working , Draytek please anwer this question , i am supporting approx 20 of these routers which i have sold to various customers and i need to be sure the settings for QOS ,load balance and strict bind.
I tried to setup wan4 for voip trafic using strict bind , ie source ip/32 to 0.0.0.0/32 (any) and when i tested it by removing wan4 modem some users lot internet , this would confirm that i have not configured it correctly or it doesnt work. we sell 100s of drayteks 2820,s 3300 mostly i need some better info on qos -please help
I tried to setup wan4 for voip trafic using strict bind , ie source ip/32 to 0.0.0.0/32 (any) and when i tested it by removing wan4 modem some users lot internet , this would confirm that i have not configured it correctly or it doesnt work. we sell 100s of drayteks 2820,s 3300 mostly i need some better info on qos -please help
Please Log in or Create an account to join the conversation.
- wwfc550
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
- swizzuk
- Offline
- Junior Member
Less
More
- Posts: 20
- Thank you received: 0
17 May 2010 09:52 #62043
by swizzuk
Replied by swizzuk on topic Draytek 3300 and QOS settings
I have also tried this, along with setting destination address as either 0.0.0.0/24 or 192.168.2.0/24 (from a subnet of 192.168.1.0/24)
Does not seem to make any difference.
What are the correct ways to prioritize traffic over VPNs to another 3300?
VoIP PBX has a static ip of say 192.168.1.5.
VoIP phones at branch site are on DHCP along with workstations, and they can be anything from 192.168.2.1 > 192.168.2.60
Any tips greatly appreciated also!
Does not seem to make any difference.
What are the correct ways to prioritize traffic over VPNs to another 3300?
VoIP PBX has a static ip of say 192.168.1.5.
VoIP phones at branch site are on DHCP along with workstations, and they can be anything from 192.168.2.1 > 192.168.2.60
Any tips greatly appreciated also!
Please Log in or Create an account to join the conversation.
- geseekoo
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 12
- Thank you received: 0
- geseekoo
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 12
- Thank you received: 0
- swizzuk
- Offline
- Junior Member
Less
More
- Posts: 20
- Thank you received: 0
26 May 2010 02:36 #62129
by swizzuk
Replied by swizzuk on topic Draytek 3300 and QOS settings
any admins or draytek'ies able to post any information on the QoS settings as per above?
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek