DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2860n+ Wireless Stalling
- flooble
- Offline
- New Member
Less
More
- Posts: 8
- Thank you received: 0
28 Sep 2014 11:45 #81298
by flooble
I'd just rather go for an evidence-based approach rather than throw some voodoo at the problem. Wireless dropouts are now much worse with iOS8 too. I either suffer crappy wireless or crappy VDSL... Can't win!
I know there are a variety of modem firmwares too - can anyone suggest what I should be running for that?
Replied by flooble on topic Re: 2860n+ Wireless Stalling
admin wrote:
Why? Not difficult and you can restore your previous config if it makes no difference.
I'd just rather go for an evidence-based approach rather than throw some voodoo at the problem. Wireless dropouts are now much worse with iOS8 too. I either suffer crappy wireless or crappy VDSL... Can't win!
I know there are a variety of modem firmwares too - can anyone suggest what I should be running for that?
Please Log in or Create an account to join the conversation.
- tightpants
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
28 Sep 2014 19:15 #81301
by tightpants
Replied by tightpants on topic Re: 2860n+ Wireless Stalling
I would say 3.7.4.2 is far more reliable than the previous version. The connection still drops now and again but not nearly as frequently as before.
I too would much rather troubleshoot using evidence rather than trial and error. The hours I have wasted with the latter.
I too would much rather troubleshoot using evidence rather than trial and error. The hours I have wasted with the latter.
Please Log in or Create an account to join the conversation.
- babis3g
- Offline
- Dedicated Contributor
Less
More
- Posts: 1686
- Thank you received: 0
30 Sep 2014 09:39 #81313
by babis3g
Replied by babis3g on topic Re: 2860n+ Wireless Stalling
Today there is a new firmware at main Taiwan 3.7.4.3 & has few fixes
Please Log in or Create an account to join the conversation.
- plittlemore
- Offline
- Junior Member
Less
More
- Posts: 20
- Thank you received: 0
30 Sep 2014 11:37 #81314
by plittlemore
Replied by plittlemore on topic Re: 2860n+ Wireless Stalling
The release notes certainly dont fill me with confidence it will fix anything to do with the wireless.
I guess I'll try it later on, as the 2860 has been relegated to being a "testing" device now.
I guess I'll try it later on, as the 2860 has been relegated to being a "testing" device now.
Please Log in or Create an account to join the conversation.
- zebbedi
- Offline
- Junior Member
Less
More
- Posts: 12
- Thank you received: 0
03 Oct 2014 13:20 #81325
by zebbedi
Replied by zebbedi on topic Re: 2860n+ Wireless Stalling
Mine's suffering from the same issue. 3.7.4.3 made no difference. DrayTek support now want me to send in the router for investigation. I sent them screenshots of a continuous ping from multiple devices all claiming the router itself was unreachable despite having a full wireless signal. The ping also shows huge lags in response times (3 seconds+) occurring at random intervals.
Please Log in or Create an account to join the conversation.
- faris
- Offline
- Junior Member
Less
More
- Posts: 35
- Thank you received: 0
06 Nov 2014 21:13 #81683
by faris
Replied by faris on topic Re: 2860n+ Wireless Stalling
Just to add to the info in this thread, I followed a suggestion from a couple of pages back which has resolved the problem for me:
I have not tried doing a full reset as I have too many settings that I don't want to have to re-configure - I'm bound to have forgotten something.
And as I understand it, doing a config backup, then a full reset, then restoring the backup isn't an option as it may restore the problem too
Can anybody confirm whether this really is the case though please?
Code:
ip arp setCacheLife 600
I have not tried doing a full reset as I have too many settings that I don't want to have to re-configure - I'm bound to have forgotten something.
And as I understand it, doing a config backup, then a full reset, then restoring the backup isn't an option as it may restore the problem too
Can anybody confirm whether this really is the case though please?
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek