DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
VigorBX 2000 to receive PSTN from Vigor2860acv
- ghostworks
- Topic Author
- Offline
- Member
Less
More
- Posts: 354
- Thank you received: 0
09 Jan 2017 14:30 #87708
by ghostworks
VigorBX 2000 to receive PSTN from Vigor2860acv was created by ghostworks
Basically I have 3 Locations ( main Office , secondary office and home )
I'd like to have a VigorBX 2000 in main office ( location A )
Secondary office has a Vigor 2860acv ( Location B )
could PSTN line in location B get transferred to Location A ( VigorBX 2000 )
I've been sat with Gigaset Hybird 120 PBX, Gigaset Maxwell 10 , Gigaset DX800a, Cisco SPA232D and can't get anyone to setup even Professionals from Fiverr, and since setting up voip on draytek 2860acv is easy, i'm planning on replacing
Gigaset Hybird 120 with VigorBX 2000
Thanks
I'd like to have a VigorBX 2000 in main office ( location A )
Secondary office has a Vigor 2860acv ( Location B )
could PSTN line in location B get transferred to Location A ( VigorBX 2000 )
I've been sat with Gigaset Hybird 120 PBX, Gigaset Maxwell 10 , Gigaset DX800a, Cisco SPA232D and can't get anyone to setup even Professionals from Fiverr, and since setting up voip on draytek 2860acv is easy, i'm planning on replacing
Gigaset Hybird 120 with VigorBX 2000
Thanks
Please Log in or Create an account to join the conversation.
- ghostworks
- Topic Author
- Offline
- Member
Less
More
- Posts: 354
- Thank you received: 0
09 Jan 2017 14:30 #87709
by ghostworks
http://forum.draytek.co.uk/viewtopic.php?f=24&t=20742
Replied by ghostworks on topic Re: VigorBX 2000 to receive PSTN from Vigor2860acv
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
Less
More
- Posts: 1723
- Thank you received: 0
09 Jan 2017 19:05 #87716
by admin
Forum Administrator
Replied by admin on topic Re: VigorBX 2000 to receive PSTN from Vigor2860acv
Your Vigor2860Vac can have its phone ports to be set up as extensions on the PBX (as one of its SIP accounts) and then you can transfer any call (SIP/Voip or the POTS line) at the BX2000 to the phone ports on the Vac just as you can to any other PBX extension (and make calls etc.) but you CANNOT transfer a call on the POTS line at your Vigor2860Vac because it's not a PBX and not an FXO port - it's just a failover port for the analogue phone ports on the router.
Forum Administrator
Please Log in or Create an account to join the conversation.
- ghostworks
- Topic Author
- Offline
- Member
Less
More
- Posts: 354
- Thank you received: 0
09 Jan 2017 20:01 #87718
by ghostworks
Replied by ghostworks on topic Re: VigorBX 2000 to receive PSTN from Vigor2860acv
Fair enough
Can I use a Cisco Spa232D that has a Dect phone at location B
Can I use a Cisco Spa232D that has a Dect phone at location B
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
Less
More
- Posts: 1723
- Thank you received: 0
10 Jan 2017 09:40 #87722
by admin
Forum Administrator
Replied by admin on topic Re: VigorBX 2000 to receive PSTN from Vigor2860acv
Yes, but seems a bit of a waste of the 'V' part of the Vac... and it may interfere with the SIP on the Vigor2860Vac unless you disable that... not sure. You can just use a regular DECT phone on the phone port.
Forum Administrator
Please Log in or Create an account to join the conversation.
- ghostworks
- Topic Author
- Offline
- Member
Less
More
- Posts: 354
- Thank you received: 0
10 Jan 2017 10:08 #87723
by ghostworks
Replied by ghostworks on topic Re: VigorBX 2000 to receive PSTN from Vigor2860acv
I want to be able to transfer the POTS line from location B to location A ( VigorBX 2000 )
Basically I Run 2 guest houses ( location A and Location B )
The Mrs works in location A and wants to manage both locations , while staying professional answering phone calls for both locations i.e. If call originated from location b her phone would display with line and the callers ID if possible so she can answer with the correct guesthouse name, secondly want to be able to transfer calls to location C ( home ) in evenings and out of season ( Gigaset Dx800a )
Current equipment
Location A :
Vigor 2860
Gigaset Hybird PBX ( can't configure way to many settings and others have tried )
Gigaset Maxwell 10 ( replacement unit as previous software failed and still in box )
Gigaset DX800a ( currently used via Main phone line only )
Gigaset SL930A ( also currently used connected to DX800a - extra usage is Ring Video door bell app )
Location B:
Vigor 2860vac
Basic phone ( in use direct with phone line )
Cisco SPS232D with Dect phone ( won't Detect when pots rings etc )
Location C :
Will get DX800a from location A when I can get Gigaset maxwell 10 working with a pbx
Thanks
Basically I Run 2 guest houses ( location A and Location B )
The Mrs works in location A and wants to manage both locations , while staying professional answering phone calls for both locations i.e. If call originated from location b her phone would display with line and the callers ID if possible so she can answer with the correct guesthouse name, secondly want to be able to transfer calls to location C ( home ) in evenings and out of season ( Gigaset Dx800a )
Current equipment
Location A :
Vigor 2860
Gigaset Hybird PBX ( can't configure way to many settings and others have tried )
Gigaset Maxwell 10 ( replacement unit as previous software failed and still in box )
Gigaset DX800a ( currently used via Main phone line only )
Gigaset SL930A ( also currently used connected to DX800a - extra usage is Ring Video door bell app )
Location B:
Vigor 2860vac
Basic phone ( in use direct with phone line )
Cisco SPS232D with Dect phone ( won't Detect when pots rings etc )
Location C :
Will get DX800a from location A when I can get Gigaset maxwell 10 working with a pbx
Thanks
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek