DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

VigorBX 2000 to receive PSTN from Vigor2860acv

More
10 Jan 2017 20:10 #87729 by gscott99
Replied by gscott99 on topic Re: VigorBX 2000 to receive PSTN from Vigor2860acv
What I would suggest is porting the PSTN number to a SIP trunk as a DDI.

Then set up a BX2000 with the ported number as an 'Alias'. This lets you put a label on incoming calls e.g 'xyz guesthouse' plus show the caller id.

Then enable remote extensions and you can have your phone handset in any location with an internet connection.

Hope the above makes sense but if not, post back and I'll try to expand on it.

cheers, Gordon

Please Log in or Create an account to join the conversation.

  • ghostworks
  • Topic Author
  • Offline
  • Member
  • Member
More
10 Jan 2017 20:29 #87732 by ghostworks
Replied by ghostworks on topic Re: VigorBX 2000 to receive PSTN from Vigor2860acv
Sounds interesting

Please Log in or Create an account to join the conversation.

  • ghostworks
  • Topic Author
  • Offline
  • Member
  • Member
More
11 Jan 2017 11:25 #87739 by ghostworks
Replied by ghostworks on topic Re: VigorBX 2000 to receive PSTN from Vigor2860acv
would it be easier to get 2 x vigorbx 2000 , for location A and B , have 1 as primary and other secondary ?

Please Log in or Create an account to join the conversation.

  • ghostworks
  • Topic Author
  • Offline
  • Member
  • Member
More
11 Jan 2017 11:52 #87740 by ghostworks
Replied by ghostworks on topic Re: VigorBX 2000 to receive PSTN from Vigor2860acv

gscott99 wrote: What I would suggest is porting the PSTN number to a SIP trunk as a DDI.


will this work for another location.
Location B has a Vigor 2860VAC ( VPN to main Office ) any incoming calls from PSTN of location B routed to Location A to VigorBX 2000

gscott99 wrote: Then set up a BX2000 with the ported number as an 'Alias'. This lets you put a label on incoming calls e.g 'xyz guesthouse' plus show the caller id.


I've read the Draytek Guide on this and looks pretty straight forward

gscott99 wrote: Then enable remote extensions and you can have your phone handset in any location with an internet connection.


Should be easy with the guides

Just need more insight with hardware I have or need for your first suggestion

Thanks

Please Log in or Create an account to join the conversation.

More
11 Jan 2017 12:50 #87742 by gscott99
Replied by gscott99 on topic Re: VigorBX 2000 to receive PSTN from Vigor2860acv

GhostWorks wrote: would it be easier to get 2 x vigorbx 2000 , for location A and B , have 1 as primary and other secondary ?



I don't think that would work. I've only ever used Gamma SIPs and they are tied to a particular IP address for authentication. So 2 sites couldn't use the same SIP trunks.

Will write some more later when I finish work.

cheers Gordon

Please Log in or Create an account to join the conversation.

  • ghostworks
  • Topic Author
  • Offline
  • Member
  • Member
More
11 Jan 2017 13:43 #87743 by ghostworks
Replied by ghostworks on topic Re: VigorBX 2000 to receive PSTN from Vigor2860acv
I already have 2 Draytel Accounts so could have location b with vigorbx 2000 just to use 1 sip draytel account to transfer PSNT of location B to main Sites vigorbx 2000

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami