DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

3G Modem Compatibility

cpnowell
Offline
Junior Member

14 Apr 2008 21:23 #48994 by cpnowell

Replied by cpnowell on topic Re: Vodafone UK E220

albanach wrote: SIM PIN: Blank
Modem init strng: AT&FE0V1X1&D2&C1S0=0 (Default)
APN Name: Blank
Modem Dial String: ATDT*99***16#
PPN Username: Blank
PPN Password: Blank

In Online Status, there's no values for the 3G modem, and it says: Message [ PPP Shutdown ]

Clicking Dial PPP has no effect

My syslog shows this for the modem:

Code: Jan 7 14:54:04 my.router Vigor: [3G]Modem stop Jan 7 14:54:04 my.router Vigor: [3G]Send init command AT&FE0V1X1&D2&C1S0=0^M Jan 7 14:54:04 my.router Vigor: [3G]Modem status:A1 20 00 00 00 00 02 00 02 00 Jan 7 14:54:04 my.router Vigor: [3G]Modem response: ^M OK^M Jan 7 14:54:05 my.router Vigor: [3G]Send query command AT+CPIN? Jan 7 14:54:05 my.router Vigor: [3G]Modem status:A1 20 00 00 00 00 02 00 02 00 Jan 7 14:54:05 my.router Vigor: [3G]Modem response: ^M +CPIN: READY^M ^M OK^M Jan 7 14:54:06 my.router Vigor: [3G]Good. Don't need PIN code Jan 7 14:54:08 my.router Vigor: [3G]Send init command AT&FE0V1X1&D2&C1S0=0^M Jan 7 14:54:08 my.router Vigor: [3G]Modem response: ^M OK^M Jan 7 14:54:08 my.router Vigor: [3G]Modem status:A1 20 00 00 00 00 02 00 02 00 Jan 7 14:54:08 my.router Vigor: [3G]Modem initialize [ AT&FE0V1X1&D2&C1S0=0^M ]

I've also tried changing the APN to internet which gives an init string of "APN:internet"

That gives the following response in the syslog:

Code: Jan 7 15:18:33 my.router Vigor: [3G]Send init command AT&FE0V1X1&D2&C1S0=0^M Jan 7 15:18:33 my.router Vigor: [3G]Modem response: ^M OK^M Jan 7 15:18:33 my.router Vigor: [3G]Modem status:A1 20 00 00 00 00 02 00 02 00 Jan 7 15:18:33 my.router Vigor: [3G]Modem initialize [AT+CGDCONT=,,"internet"^M ] Jan 7 15:18:33 my.router Vigor: [3G]Modem response: ^M OK^M Jan 7 15:18:33 my.router Vigor: [3G]Modem dial [ATDT*99***16# ^M ] Jan 7 15:18:33 my.router Vigor: [3G]Modem status:A1 20 00 00 00 00 02 00 02 00 Jan 7 15:18:33 my.router Vigor: [3G]Modem response: ^M ERROR^M Jan 7 15:18:33 my.router Vigor: [3G]Modem status:A1 20 00 00 00 00 02 00 02 00

Does anyone have any suggestions to help get this modem connected?

You are entering the word "internet" in the wrong place.

You enter "internet" (without the quotes and WITHOUT "APN:" at the front) in the APN name box and then you click the APPLY button. This will transfer the name "internet" into the box above and the Modem Initial String should look like this:

Modem Initial String [APN:internet] (the [] signifying what is inside the box)

This should wipe out the AT&FE0V1X1&D2&C1S0=0 which should not be there for the E220

The rest of the setting you should use are similar to what you had...

Modem Dial String: ATDT*99***16#
PPP Username: web
PPP Password: web

(don't use blanks)

Try this. I had a contract vodafone E220 working in 5 mins like this...

Colin

Please Log in or Create an account to join the conversation.

albanach
Offline
New Member

14 Apr 2008 23:09 #48996 by albanach

Replied by albanach on topic 3G Modem Compatibility

Still not working

I seem to have some progress, as the online status now shows a link speed of 3600000. Everything else for the modem is 0 except ip address which is ---

Here's the syslog output.



Code:

Jan  7 20:12:25 my.router Vigor: [3G]Send init command AT&FE0V1X1&D2&C1S0=0^M 
Jan  7 20:12:25 my.router Vigor: [3G]Modem response: ^M OK^M 
Jan  7 20:12:25 my.router Vigor: [3G]Modem status:A1 20 00 00 00 00 02 00 02 00 
Jan  7 20:12:26 my.router Vigor: [3G]Modem initialize [AT+CGDCONT=,,"internet"^M ] 
Jan  7 20:12:26 my.router Vigor: [3G]Modem response: ^M OK^M 
Jan  7 20:12:26 my.router Vigor: [3G]Modem dial [ATDT*99***16#^M ]
Jan  7 20:12:26 my.router Vigor: [3G]Modem status:A1 20 00 00 00 00 02 00 02 00 
Jan  7 20:12:26 my.router Vigor: [3G]Modem response: ^M ERROR^M 
Jan  7 20:12:26 my.router Vigor: [3G]Modem status:A1 20 00 00 00 00 02 00 02 00

Please Log in or Create an account to join the conversation.

cpnowell
Offline
Junior Member

14 Apr 2008 23:46 #48997 by cpnowell

Replied by cpnowell on topic 3G Modem Compatibility

albanach wrote: Still not working

I seem to have some progress, as the online status now shows a link speed of 3600000. Everything else for the modem is 0 except ip address which is ---

Here's the syslog output.

Code: Jan 7 20:12:25 my.router Vigor: [3G]Send init command AT&FE0V1X1&D2&C1S0=0^M Jan 7 20:12:25 my.router Vigor: [3G]Modem response: ^M OK^M Jan 7 20:12:25 my.router Vigor: [3G]Modem status:A1 20 00 00 00 00 02 00 02 00 Jan 7 20:12:26 my.router Vigor: [3G]Modem initialize [AT+CGDCONT=,,"internet"^M ] Jan 7 20:12:26 my.router Vigor: [3G]Modem response: ^M OK^M Jan 7 20:12:26 my.router Vigor: [3G]Modem dial [ATDT*99***16#^M ] Jan 7 20:12:26 my.router Vigor: [3G]Modem status:A1 20 00 00 00 00 02 00 02 00 Jan 7 20:12:26 my.router Vigor: [3G]Modem response: ^M ERROR^M Jan 7 20:12:26 my.router Vigor: [3G]Modem status:A1 20 00 00 00 00 02 00 02 00

Did you try unplugging the modem, waiting till the router had "de-installed" it (keep looking at the "Online Status" page in another window to make sure the 3G Modem Icon & Section disappears as it refreshes) and then just plug it back in again? How are you initiating the connection? (I've found that dropping the main PPPoA connect by pulling the adsl lead is better/more reliable than hitting the DialPPP button)

Colin

PS Meant to add, once you have setup/filled in the 3G Modem Backup section in once, it won't need doing again. Oh, and I am also using a 2800VG...

Please Log in or Create an account to join the conversation.

jhtwu
Offline
New Member

18 Apr 2008 14:55 #49072 by jhtwu

Replied by jhtwu on topic 3G Modem Compatibility

[3G]Modem dial [ATDT*99***16#^M ]

[3G]Modem response: ^M ERROR^M

You can try to change the dial string, until the ERROR message becomes OK

Please Log in or Create an account to join the conversation.

doone128
Offline
New Member

22 Apr 2008 11:44 #49170 by doone128

Replied by doone128 on topic Re: Huawei E172 aka Vodafone USB 3G Stick Working

kp73 wrote: I got the Huawei E172 working with 2800G

Any chance you could tell me how you got this working? I just keep getting PPP Shutdown and cannot get any further. Have tried every config listed here and many others but no joy.

Please Log in or Create an account to join the conversation.

kp73
Offline
New Member

24 Apr 2008 14:21 #49222 by kp73

Replied by kp73 on topic Re: Huawei E172 aka Vodafone USB 3G Stick Working

doone128 wrote:
kp73 wrote: I got the Huawei E172 working with 2800G

Any chance you could tell me how you got this working? I just keep getting PPP Shutdown and cannot get any further. Have tried every config listed here and many others but no joy.

I just worked! I setup the E172/Vodafone usb stick on my pc first , once that was working I plugged it into the router and followed this guide:

http://draytek.co.uk/support/kb_vigor_3g.html

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami