babis3g wrote: ...take out the cable coming from master socket rj 11 plug (going to wan of the draytek)...you can just unplug it from the 2750 wan
Turn on the 2750 and wait until the 2750 will be ready for operation
(Check at the status page - the one you posted the screen shot - and see if is any info at status page and server information with out the wan cable â–¶Noteâ—€ this is only for educational purpose if will show the chipset of the 2750, once telnet was not working)...

babis3g wrote: Hi again & sorry with the issues.Hope support will help more
Can ask?
By doing this quoted trick when wan rj-11 cable was out and while the 2750 was powered on... at status page and the server information ... did not display any chipset info?(with out connected the rj-11 cable coming from master socket)

Thanks and good luck

SupraWez wrote:

babis3g wrote: Hi again & sorry with the issues.Hope support will help more
Can ask?
By doing this quoted trick when wan rj-11 cable was out and while the 2750 was powered on... at status page and the server information ... did not display any chipset info?(with out connected the rj-11 cable coming from master socket)

Thanks and good luck

I will double check next time I switch over to the Draytek, at the moment its not in use due to the poor performance.

babis3g wrote: OK thanks and hope this time all go well with the support 8)