I think there is a new rebooting issue in the RC3, though UPNP seems fixed.
Also, you cannot adjust the ADSL SNR anymore in this one (eg 'adsl snr 15').

tobythetenor wrote: I think there is a new rebooting issue in the RC3, though UPNP seems fixed.
Also, you cannot adjust the ADSL SNR anymore in this one (eg 'adsl snr 15').

i think each command needs 10 value, never tried 15
so try 10,20,30 if will work
have a look here
http://www.forum.draytek.co.uk/viewtopic.php?f=13&t=19492#p80564

No, that doesn't work either.
SNR still worked fine with v2860_r41111_001.
In RC3, there is simply no change to the SNR.

tobythetenor wrote: No, that doesn't work either.
SNR still worked fine with v2860_r41111_001.
In RC3, there is simply no change to the SNR.

sorry, email the support to be aware

I already have e-mailed support but didn't get very far. I just keep being told this command is not supported on my 2860n.

I have asked for firmware v2860_r41111_001 so I can test if the snr tweak works.

The reply's I got from support are in the forum below:
http://www.forum.draytek.co.uk/viewtopic.php?f=13&t=19492

The support seem to be unaware/or just not talking with the firmware team that's actually testing the firmware's.

If I can get hold of v2860_r41111_001 I can test and if it works go back and see if I can get anyone technical to actually sort the issue.

Also it would be a good idea if Draytek made all the Beta/testing firmware's available, maybe via a login so we don't have to keep asking for the beta firmware's. unless someone else has

Has anyone got v2860_r41111_001 or a link so I can try out as support have gone quiet.


Cheers David